MYSQL_TABLE(5)                File Formats Manual               MYSQL_TABLE(5)


NAME
       mysql_table - Postfix MySQL client configuration

SYNOPSIS
       postmap -q "string" mysql:/etc/postfix/filename

       postmap -q - mysql:/etc/postfix/filename <inputfile

DESCRIPTION
       The Postfix mail system uses optional tables for address rewriting or
       mail routing. These tables are usually in dbm or db format.

       Alternatively, lookup tables can be specified as MySQL databases.  In
       order to use MySQL lookups, define a MySQL source as a lookup table in
       main.cf, for example:
           alias_maps = mysql:/etc/mysql-aliases.cf

       The file /etc/postfix/mysql-aliases.cf has the same format as the
       Postfix main.cf file, and can specify the parameters described below.

LIST MEMBERSHIP
       When using SQL to store lists such as $mynetworks, $mydestination,
       $relay_domains, $local_recipient_maps, etc., it is important to
       understand that the table must store each list member as a separate
       key. The table lookup verifies the *existence* of the key. See "Postfix
       lists versus tables" in the DATABASE_README document for a discussion.

       Do NOT create tables that return the full list of domains in
       $mydestination or $relay_domains etc., or IP addresses in $mynetworks.

       DO create tables with each matching item as a key and with an arbitrary
       value. With SQL databases it is not uncommon to return the key itself
       or a constant value.

MYSQL PARAMETERS

       hosts  The hosts that Postfix will try to connect to and query from.
              Specify unix: for UNIX domain sockets, inet: for TCP connections
              (default).  Example:
                  hosts = host1.some.domain host2.some.domain:port
                  hosts = unix:/file/name

              The hosts are tried in random order, with all connections over
              UNIX domain sockets being tried before those over TCP.  The
              connections are automatically closed after being idle for about
              1 minute, and are re-opened as necessary. Postfix versions 2.0
              and earlier do not randomize the host order.

              NOTE: if you specify localhost as a hostname (even if you prefix
              it with inet:), MySQL will connect to the default UNIX domain
              socket.  In order to instruct MySQL to connect to localhost over
              TCP you have to specify
                  hosts = 127.0.0.1

       user, password
              The user name and password to log into the mysql server.
              Example:
                  user = someone
                  password = some_password

       dbname The database name on the servers. Example:
                  dbname = customer_database

       query  The SQL query template used to search the database, where %s is
              a substitute for the address Postfix is trying to resolve, e.g.
                  query = SELECT replacement FROM aliases WHERE mailbox = '%s'

              By default, every query must return a result set (instead of
              storing its results in a table); with "require_result_set = no"
              (Postfix 3.2 and later), the absence of a result set is treated
              as "not found".

              This parameter supports the following '%' expansions:

              %%     This is replaced by a literal '%' character.

              %s     This is replaced by the input key.  SQL quoting is used
                     to make sure that the input key does not add unexpected
                     metacharacters.

              %u     When the input key is an address of the form user@domain,
                     %u is replaced by the SQL quoted local part of the
                     address.  Otherwise, %u is replaced by the entire search
                     string.  If the localpart is empty, the query is
                     suppressed and returns no results.

              %d     When the input key is an address of the form user@domain,
                     %d is replaced by the SQL quoted domain part of the
                     address.  Otherwise, the query is suppressed and returns
                     no results.

              %[SUD] The upper-case equivalents of the above expansions behave
                     in the query parameter identically to their lower-case
                     counter-parts.  With the result_format parameter (see
                     below), they expand the input key rather than the result
                     value.

              %[1-9] The patterns %1, %2, ... %9 are replaced by the
                     corresponding most significant component of the input
                     key's domain. If the input key is user@mail.example.com,
                     then %1 is com, %2 is example and %3 is mail. If the
                     input key is unqualified or does not have enough domain
                     components to satisfy all the specified patterns, the
                     query is suppressed and returns no results.

              The domain parameter described below limits the input keys to
              addresses in matching domains. When the domain parameter is
              non-empty, SQL queries for unqualified addresses or addresses in
              non-matching domains are suppressed and return no results.

              This parameter is available with Postfix 2.2. In prior releases
              the SQL query was built from the separate parameters:
              select_field, table, where_field and additional_conditions. The
              mapping from the old parameters to the equivalent query is:

                  SELECT [select_field]
                  FROM [table]
                  WHERE [where_field] = '%s'
                        [additional_conditions]

              The '%s' in the WHERE clause expands to the escaped search
              string.  With Postfix 2.2 these legacy parameters are used if
              the query parameter is not specified.

              NOTE: DO NOT put quotes around the query parameter.

       result_format (default: %s)
              Format template applied to result attributes. Most commonly used
              to append (or prepend) text to the result. This parameter
              supports the following '%' expansions:

              %%     This is replaced by a literal '%' character.

              %s     This is replaced by the value of the result attribute.
                     When result is empty it is skipped.

              %u     When the result attribute value is an address of the form
                     user@domain, %u is replaced by the local part of the
                     address. When the result has an empty localpart it is
                     skipped.

              %d     When a result attribute value is an address of the form
                     user@domain, %d is replaced by the domain part of the
                     attribute value. When the result is unqualified it is
                     skipped.

              %[SUD1-9]
                     The upper-case and decimal digit expansions interpolate
                     the parts of the input key rather than the result. Their
                     behavior is identical to that described with query, and
                     in fact because the input key is known in advance,
                     queries whose key does not contain all the information
                     specified in the result template are suppressed and
                     return no results.

              For example, using "result_format = smtp:[%s]" allows one to use
              a mailHost attribute as the basis of a transport(5) table. After
              applying the result format, multiple values are concatenated as
              comma separated strings. The expansion_limit and parameter
              explained below allows one to restrict the number of values in
              the result, which is especially useful for maps that must return
              at most one value.

              The default value %s specifies that each result value should be
              used as is.

              This parameter is available with Postfix 2.2 and later.

              NOTE: DO NOT put quotes around the result format!

       domain (default: no domain list)
              This is a list of domain names, paths to files, or dictionaries.
              When specified, only fully qualified search keys with a
              *non-empty* localpart and a matching domain are eligible for
              lookup: 'user' lookups, bare domain lookups and "@domain"
              lookups are not performed. This can significantly reduce the
              query load on the MySQL server.
                  domain = postfix.org, hash:/etc/postfix/searchdomains

              It is best not to use SQL to store the domains eligible for SQL
              lookups.

              This parameter is available with Postfix 2.2 and later.

              NOTE: DO NOT define this parameter for local(8) aliases, because
              the input keys are always unqualified.

       expansion_limit (default: 0)
              A limit on the total number of result elements returned (as a
              comma separated list) by a lookup against the map.  A setting of
              zero disables the limit. Lookups fail with a temporary error if
              the limit is exceeded.  Setting the limit to 1 ensures that
              lookups do not return multiple values.

       option_file
              Read options from the given file instead of the default my.cnf
              location. This reads options from the [client] option group,
              optionally followed by options from the group given with
              option_group.

              This parameter is available with Postfix 2.11 and later.

       option_group (default: Postfix >=3.2: client, <= 3.1: empty)
              Read options from the given group of the mysql options file,
              after reading options from the [client] group.

              Postfix 3.2 and later read [client] option group settings by
              default. To disable this specify no option_file and specify
              "option_group =" (i.e. an empty value).

              Postfix 3.1 and earlier don't read [client] option group
              settings unless a non-empty option_file or option_group value
              are specified. To enable this, specify, for example,
              "option_group = client".

              This parameter is available with Postfix 2.11 and later.

       require_result_set (default: yes)
              If "yes", require that every query returns a result set.  If
              "no", treat the absence of a result set as "not found".

              This parameter is available with Postfix 3.2 and later.

       tls_cert_file
              File containing client's X509 certificate.

              This parameter is available with Postfix 2.11 and later.

       tls_key_file
              File containing the private key corresponding to tls_cert_file.

              This parameter is available with Postfix 2.11 and later.

       tls_CAfile
              File containing certificates for all of the X509 Certification
              Authorities the client will recognize.  Takes precedence over
              tls_CApath.

              This parameter is available with Postfix 2.11 and later.

       tls_CApath
              Directory containing X509 Certification Authority certificates
              in separate individual files.

              This parameter is available with Postfix 2.11 and later.

       tls_verify_cert (default: no)
              Verify that the server's name matches the common name in the
              certificate.

              This parameter is available with Postfix 2.11 and later.

USING MYSQL STORED PROCEDURES
       Postfix 3.2 and later support calling a stored procedure instead of
       using a SELECT statement in the query, e.g.

           query = CALL lookup('%s')

       The previously described '%' expansions can be used in the parameter(s)
       to the stored procedure.

       By default, every stored procedure call must return a result set, i.e.
       every code path must execute a SELECT statement that returns a result
       set (instead of storing its results in a table). With
       "require_result_set = no", the absence of a result set is treated as
       "not found".

       A stored procedure must not return multiple result sets.  That is,
       there must be no code path that executes multiple SELECT statements
       that return a result (instead of storing their results in a table).

       The following is an example of a stored procedure returning a single
       result set:

       CREATE [DEFINER=`user`@`host`] PROCEDURE
       `lookup`(IN `param` VARCHAR(255))
           READS SQL DATA
           SQL SECURITY INVOKER
           BEGIN
               select goto from alias where address=param;
           END

OBSOLETE MAIN.CF PARAMETERS
       For compatibility with other Postfix lookup tables, MySQL parameters
       can also be defined in main.cf.  In order to do that, specify as MySQL
       source a name that doesn't begin with a slash or a dot.  The MySQL
       parameters will then be accessible as the name you've given the source
       in its definition, an underscore, and the name of the parameter.  For
       example, if the map is specified as "mysql:mysqlname", the parameter
       "hosts" would be defined in main.cf as "mysqlname_hosts".

       Note: with this form, the passwords for the MySQL sources are written
       in main.cf, which is normally world-readable.  Support for this form
       will be removed in a future Postfix version.

OBSOLETE QUERY INTERFACE
       This section describes an interface that is deprecated as of Postfix
       2.2. It is replaced by the more general query interface described
       above. If the query parameter is defined, the legacy parameters
       described here ignored.  Please migrate to the new interface as the
       legacy interface may be removed in a future release.

       The following parameters can be used to fill in a SELECT template
       statement of the form:

           SELECT [select_field]
           FROM [table]
           WHERE [where_field] = '%s'
                 [additional_conditions]

       The specifier %s is replaced by the search string, and is escaped so if
       it contains single quotes or other odd characters, it will not cause a
       parse error, or worse, a security problem.

       select_field
              The SQL "select" parameter. Example:
                  select_field = forw_addr

       table  The SQL "select .. from" table name. Example:
                  table = mxaliases

       where_field
              The SQL "select .. where" parameter. Example:
                  where_field = alias

       additional_conditions
              Additional conditions to the SQL query. Example:
                  additional_conditions = AND status = 'paid'

SEE ALSO
       postmap(1), Postfix lookup table maintenance
       postconf(5), configuration parameters
       ldap_table(5), LDAP lookup tables
       pgsql_table(5), PostgreSQL lookup tables
       sqlite_table(5), SQLite lookup tables

README FILES
       Use "postconf readme_directory" or "postconf html_directory" to locate
       this information.
       DATABASE_README, Postfix lookup table overview
       MYSQL_README, Postfix MYSQL client guide

LICENSE
       The Secure Mailer license must be distributed with this software.

HISTORY
       MySQL support was introduced with Postfix version 1.0.

AUTHOR(S)
       Original implementation by:
       Scott Cotton, Joshua Marcus
       IC Group, Inc.

       Further enhancements by:
       Liviu Daia
       Institute of Mathematics of the Romanian Academy
       P.O. BOX 1-764
       RO-014700 Bucharest, ROMANIA

       Stored-procedure support by John Fawcett.

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

                                                                MYSQL_TABLE(5)